廖舒纶,张立文,原思宇,等.GCr15棒线材连轧过程有限元模拟[J].,2007,(6):814-817 |
GCr15棒线材连轧过程有限元模拟 |
FE simulation of continuous rolling process of GCr15 steel rod and wire |
|
DOI:10.7511/dllgxb200706007 |
中文关键词: 温度演化 数值模拟 轧制 |
英文关键词: temperature evolution numerical simulation rolling |
基金项目:大连市优秀青年科技人才基金资助项目(2001-122). |
|
摘要点击次数: 744 |
全文下载次数: 712 |
中文摘要: |
借助商业有限元软件MSC. Marc,建立了棒线材连轧过程的三维弹塑性模型,将φ8 mm GCr15棒线材从出炉到精轧结束共26道次的轧制过程分为6段进行了模拟. 前3个模型采用了静态分析,模型道次间刚性体以实际速度推动轧件进入下一道次. 由于中轧道次后的轧制过程速度较高, 后3个模型的模拟使用动态有限元法,在方程中引入了惯性力. 用该组模型分析了连轧过程中轧件的变形以及温度演化规律,计算结果与测量结果吻合较好,证明了该模型模拟棒线材轧制过程的有效性. |
英文摘要: |
Three-dimensional elastic-plastic models of steel rod and wire continuous rolling process were developed with the aid of the commercial FE (finite element) software MSC. Marc. The 26-pass continuous rolling process of φ8 mm GCr15 steel rod and wire from |
查看全文
查看/发表评论 下载PDF阅读器 |
关闭 |
|
|
|