| 韩贤国,王敏杰,欧阳华江.考虑直径和质量变化的车削工件振动建模和试验分析[J].,2012,(4):514-521 |
| 考虑直径和质量变化的车削工件振动建模和试验分析 |
| Establishment of vibration model and experimental analyses of workpiece with variable mass and diameter in turning process |
| |
| DOI：10.7511/dllgxb201204009 |
| 中文关键词: 工件振动力学模型 车削加工 轴向移动三维荷载 随时间变化直径和质量的工件 |
| 英文关键词: vibration dynamic model of workpiece turning operation axially moving three-dimensional load time-varying diameter and mass of workpiece |
| 基金项目:国家自然科学基金资助项目(50775018). |
|
| 摘要点击次数: 980 |
| 全文下载次数: 741 |
| 中文摘要: |
| 根据实际车削加工过程,建立了受轴向移动三维荷载作用的工件振动力学模型,其中考虑了被加工件的直径和质量随时间变化对振动的影响．在Matlab中,对工件振动模型的运动方程进行数值求解,得到不同车削条件下,直径和质量随时间变化的工件的振动响应．计算结果表明,车削加工中工件直径和质量变化对工件振动响应影响较大,荷载移动速度也影响工件的振动幅度．车削加工试验和测量表明工件振动力学模型的计算结果与试验结果基本相吻合,该振动模型符合实际车削轴加工过程的情况． |
| 英文摘要: |
| Vibration dynamic model of workpiece subjected to axially moving three-dimension load along its axis is established in turning operation according to actual turning process, in which the effect of time-varying diameter and mass of workpiece is considered. Moreover, the equation of motion of the model is solved and computed with Matlab; dynamic response of workpiece is obtained under different cutting conditions with consideration of the effect of time-varying diameter and mass of workpiece. The computational results show the time-varying diameter and mass of workpiece have an obvious influence on the dynamic response of workpiece, and moving speed of load has a distinctive effect on amplitude of vibration of the shaft. Machining the shaft in turning operation, experimental result is basically in good agreement with the computational one of the model, which accords with the actual turning operation. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|