郭晓光.基于FEM-SPH耦合方法的AISI4340钢超精密切削过程仿真[J].,2013,53(4):526-531 |
基于FEM-SPH耦合方法的AISI4340钢超精密切削过程仿真 |
Simulation research on AISI4340 steel ultra-precision cutting process based on FEM-SPH coupling method |
|
DOI:10.7511/dllgxb201304011 |
中文关键词: 超精密切削 无网格法 FEM-SPH耦合 仿真 |
英文关键词: ultra-precision cutting mesh-free method FEM-SPH coupling simulation |
基金项目: |
|
摘要点击次数: 1737 |
全文下载次数: 1580 |
中文摘要: |
数值模拟是研究金属切削的重要手段,但有限元方法(FEM)由于依赖网格而存在一定的局限性,不适宜处理大变形问题.光滑粒子动力学(SPH)是一种无网格法,可以避免网格畸变,解决切削过程中材料大变形问题.结合两种方法的各自优点,建立了AISI4340钢金刚石超精密切削过程的FEM\|SPH耦合模型,研究切削过程中材料的去除机理.仿真结果表明:随着切削过程的进行工件内部应力逐渐增大,当达到屈服极限时,工件材料沿前刀面塑性流动,形成切屑,刀尖钝圆的推挤起了决定性的作用;成形表面下存在较为严重的残余应力;切削热主要来源于切削过程中塑性功的转换且大部分被切屑带走;增大刀尖钝圆半径将会使切削力尤其是切削抗力显著增大. |
英文摘要: |
Numerical simulation is an important approach to metal cutting process, but finite element method (FEM) has some limitations and can not handle large deformation problems since it′s based on mesh. Smoothed particle hydrodynamics (SPH) is a mesh-free method and can avoid mesh distortion and hence resolve large deformation of materials in cutting. Combining the advantages of conventional FEM with the mesh-free method, SPH, a FEM-SPH coupling model for AISI4340 steel diamond ultra-precision cutting is established and the cutting mechanism is studied. The simulation results show that:with the inner stress increasing and reaching yield stress, the cutting layer material flows in a plastic fashion to form a chip and tool edge plays a key role in cutting; severe residual stress is observed beneath the formed surface; cutting heat is mainly converted from plastic work transformation and most heat is taken away by the chip; a large edge radius will bring a great increment in cutting force, especially in the thrust force. |
查看全文
查看/发表评论 下载PDF阅读器 |
关闭 |