文章摘要
黄正兴,王志刚,张鑫.高压下碳纳米管阵列与金属接触热阻研究[J].,2017,57(6):638-643
高压下碳纳米管阵列与金属接触热阻研究
Study of thermal contact resistance between CNT array and metal under high pressure
  
DOI：10.7511/dllgxb201706013
中文关键词: 热界面材料  碳纳米管阵列  接触热阻  瞬态热反射测试
英文关键词: thermal interface material  carbon nanotube (CNT) array  thermal contact resistance  transient thermo-reflectance measurement
基金项目:国家自然科学基金资助项目(61131004)；辽宁省自然科学基金资助项目(201602153).
作者单位
黄正兴,王志刚,张鑫  
摘要点击次数: 980
全文下载次数: 1983
中文摘要:
      碳纳米管具有很高的轴向热导率，近年来基于碳纳米管阵列的热界面材料得到了广泛的关注．但碳纳米管阵列与金属间的接触热阻较大，通常在10 mm2·K/W以上，限制了其实际应用．目前通过化学成键等方法可将其界面热阻降至0.6 mm2·K/W，但这些方法都需要牺牲碳纳米管耐高温的特点．为保证其耐高温特性，通过施加压力的方法降低了碳纳米管阵列与金属间的接触热阻．对于高度为800 μm的碳纳米管阵列，当压力为1.49 MPa时，测量得到的碳纳米管阵列-Au界面接触热阻为1.90~3.51 mm2·K/W，接近化学成键法的结果并且远小于小压力作用下的热阻，这一结果为进一步减小碳纳米管的接触热阻提供了新的思路．
英文摘要:
      Due to its high axial thermal conductivity, carbon nanotube (CNT) array based thermal interface material has attracted much attention in recent years. However, the large thermal contact resistance between CNT array and metal, usually more than 10 mm2·K/W, is a bottleneck for its practical application. At present, by chemical bonding and other methods, a small value as 0.6 mm2·K/W has been obtained, but these methods need to sacrifice high temperature characteristics of CNT. To solve this problem, the thermal contact resistance between CNT array and metal is reduced by using pressure.For CNT array with a height of 800 μm, thermal contact resistance between CNT array and Au is measured with a value between 1.90 and 3.51 mm2·K/W, under a relative high pressure of 1.49 MPa, which is closed to the result of chemical bonding method and far less than thermal resistance under a small pressure. It provides a new way to further reduce the thermal contact resistance of CNT.
查看全文   查看/发表评论  下载PDF阅读器
关闭