文章摘要
程博,张璧,白倩,乔国文.选区激光熔化马氏体时效钢(18Ni300)工艺参数研究[J].,2018,58(5):471-478
选区激光熔化马氏体时效钢(18Ni300)工艺参数研究
Study of process parameters of maraging steel (18Ni300) manufactured by selective laser melting
  
DOI:10.7511/dllgxb201805005
中文关键词: 选区激光熔化(SLM)  增材制造  马氏体时效钢  球化效应  工艺参数
英文关键词: selective laser melting (SLM)  additive manufacturing  maraging steel  balling effect  process parameters
基金项目:国家自然科学基金资助项目(51605077);中央高校基本科研业务费专项资金资助项目(DUT17JC01).
作者单位
程博,张璧,白倩,乔国文  
摘要点击次数: 250
全文下载次数: 325
中文摘要:
      采用单因素条件变量分析方法,研究选区激光熔化(SLM)增材制造过程中激光功率和扫描速度对马氏体时效钢成形件表面质量、相对致密度和硬度的影响规律.结果表明,随着激光扫描速度增大,试件表面熔道球化效应增强,内部缺陷增多,试件相对致密度和硬度逐渐降低;随着激光功率增大,试件表面熔道重熔区域变大,但试件的相对致密度和硬度无明显变化.本研究可为马氏体时效钢选区激光熔化工艺参数的合理选择提供参考.
英文摘要:
      The single variable analysis method is adopted to evaluate the effects of laser power and scanning speed on the surface topography, relative density and hardness of maraging steel parts in selective laser melting (SLM) additive manufacturing process. The result shows that with an increase in the laser scanning speed, balling effect increases and both relative density and hardness of the part are decreased because of the increment of internal defects, and with an increase in the laser power, remelt zone of track on workpiece surface is increased, but neither relative density nor hardness are affected. This study can provide reference for determining laser process parameters of SLMed maraging steels.
查看全文   查看/发表评论  下载PDF阅读器
关闭