|
选区激光熔化马氏体时效钢(18Ni300)工艺参数研究 |
Study on process parameters of maraging steel manufactured by selective laser melting |
投稿时间:2018-03-18 修订日期:2018-04-25 |
DOI: |
中文关键词: 选区激光熔化(SLM) 增材制造 马氏体时效钢 球化效应 工艺参数 |
英文关键词: Selective laser melting Additive manufacturing Maraging steel Balling effect Process parameters |
基金项目:国家自然科学基金资助(51605077),中央高校基本科研业务费资助(DUT17JC01) |
|
摘要点击次数: 281 |
全文下载次数: 0 |
中文摘要: |
本文采用单因素条件变量分析方法,研究选区激光熔化(SLM)增材过程中激光功率和扫描速度对马氏体时效钢成形件表面质量、致密度和硬度的影响规律。结果表明,随着激光扫描速度增大,试件表面熔道球化效应增强,内部缺陷增多,试件致密度和硬度逐渐降低;随着激光功率增大,试件表面熔道重熔区域变大,但试件的致密度和硬度无明显变化。本研究可为马氏体时效钢选区激光熔化工艺参数的合理选择提供指导。 |
英文摘要: |
The single variable analysis method is adopted to evaluate the effects of laser power and scanning speed on the surface topography, mass density and hardness of maraging steel parts in selective laser melting (SLM) process. The result shows that with an increase in the laser scanning speed, balling effect occurring on the part’s surface increases and both density and hardness of the part are decreased because of the increment of internal defects, whereas laser power does not show an obvious effect on the part quality although the remelt zone becomes larger. This study can provide guidance for determining laser process parameters of SLMed maraging steels. |
View Fulltext
查看/发表评论 下载PDF阅读器 |
关闭 |